APPLICATIONS
Valv-trol's versatile 2-way 3–way valves have been designed for usage in a wide variety
of industrial applications.
Click here to GO to APPLICATIONS front page
HYDROSTATIC TESTING |
 |
 |
 |
Medium Pressure
Hydro-Tester
Model #D-1012,
1-1/4” 3,500 PSI Two-Way Valves used to fill cast iron pipes with water for hydrostatic pressure testing. The larger model #D-1014, 2” 3,000 PSI valve is used
to purge air as the pipe fills with water, then decompress after the test is complete. |
Medium Pressure
Hydro-Tester
Model #D-1014,
2” Two-Way and Model
#D-1005, 3” Three-Way Valves. This wall of valves allows operators to select which pumps and accumulators are to be
used for hydrostatic
pressure testing of cast iron pipe. |
Hydro-Testing
Of Steel Pipe
Model #D-1015-AL,
3” 4,200 PSI Two-Way Valve used to purge air from the test pipe as it fills, then open at the end of the test to decompress and drain the water. |
| |
|
|
 |
 |
 |
Hydro-Testing
Of Steel Pipe
Model #D-1015-AL,
3” 4,200 PSI Two-Way Valve and Model #D-1022-V, 4” 4,200 PSI Two-Way Valve in parallel provide high volume water for quick filling of the test pipe. When the test is complete, both valves are opened to decompress and drain the water. |
Hydrostatic Testing
Of Steel Pipe
Model #D-1012-L,
1-1/4” 3,600 PSI Two-Way Valves and model
#D-1004-MOD, 2” 3,500 PSI Three-Way Diverter Valve used to automate the pressure testing of steel pipe. Small valves fill several pipes simultaneously, and the large valve is used to fill before pressurizing and decompress after testing. |
Hydro-Test Stand
Model #D-1004-MOD,
2”, 3,000 PSI Diverter Valve with 4-bolt SAE
code 61 ports. |
| |
|
|
 |
|
|
Hydro-Testing
Of Steel Pipe
Model #D-1012-L Cylinder Operated Two-Way Valves with hydraulic operators have proximity switches mounted to verify if the valves are open or closed. |
|
|
|
